Machine Hardware

The gas springs support the main door to allow the operator to lift and close the door easier. The gas springs come in sizes appropriate to the weight being lifted and the length of the mechanism as closed and open. Make sure to select the proper mechanism with open/closed lengths and end mountings. Captive Ball(B) and/or Eyelet(E). 29cm Open Pressure: 150N     ..

On/Off Switch, Green ..

Metal Fan Grill ..

Rabbit Laser Logo Fan Grill ..

Door Hinge for all models of laser machines   ..

Momentary push button, green.  Light Control Switch: LS-15G (SPST, Push-Push, Green Plastic) ..

The Linear guide block supports the focal head on the gantry. Two linear guide blocks are used to support the gantry over the work table. Operating with less friction than sleeve and roller bearing carriages, ball bearing carriages provide accurate movement and positioning in high-speed, high-load applications. Mount in any orientation without affecting load capacity. End seals keep lubricant in and dirt out. 57mm x 28mm x 34mm ..

 The Linear guide block supports the focal head on the gantry. Two linear guide blocks are used to support the gantry over the work table. Operating with less friction than sleeve and roller bearing carriages, ball bearing carriages provide accurate movement and positioning in high-speed, high-load applications. Mount in any orientation without affecting load capacity. End seals keep lubricant in and dirt out. 57mm x 28mm x 34mm ..