Motion Control

Motion Control Systems

Sort By:
Show:
Display: List Grid
3-Phase Stepper Motor Driver (Part Number SMD-3DM683)
Step & direction or CW/CCW control DSP-based stepper control technology Anti resonance Automatic motor identification and self configuration Extra low noise Extra smooth movement Low drive & motor heating Maximum frequency: 200KHz Input voltage: 20 - 60 VDC Output current: 7 selections of 3.20 - 8.30A via DIP switches; or any value of 0.5 - 8.30A via software configuration Micro steps: 16 selections of full - 128 step via DIP switches; or full - 512 step via software configuration Automatic idle current reduction ..
$105.00
3-Phase Stepper Motor Driver (Part Number SMD-3DM783)
Step & direction or CW/CCW control DSP-based stepper control technology Anti resonance Automatic motor identification and self configuration Extra low noise Extra smooth movement Low drive & motor heating Maximum frequency: 200KHz Input voltage: 24 - 70 VDC Output current: 7 selections of 2.10 - 8.40A via DIP switches; or any value of 0.5 - 8.40A via software configuration Micro steps: 16 selections of full - 128 step via DIP switches; or full - 512 step via software configuration Automatic idle current reduction ..
$95.00
Bi-Polar Stepper Motor Driver (Part Number SMD-2M542-06)
Heatsink integrated and connectors included Input: 20-50 VDC Output: 1.0 - 4.2A Microstepping options: 1/2, 1/4, 1/8, 1/16, 1/32, 1/64, 1/128; or 1/5, 1/10, 1/20, 1/25, 1/40, 1/50, 1/100, 1/125 DIP switch current options: 1.20A, 1.75A, 2.29A, 2.84A, 3.41A, 3.97A, 4.51A, 5.04A Low motor heating because of the implementation of 3-state current control technology Support: PULSE/DIRECTION & CW/CCW modes Self-adjustment technology Pulse input frequency up to 300 KHz TTL compatible and optically isolated input Automatic idle-curr..
$67.00
Bi-Polar Stepper Motor Driver (Part Number SMD-DM442)
Heatsink integrated and connectors included Input: 20-40 VDC Output: 1.0 - 4.2A Microstepping options: 1/2, 1/4, 1/8, 1/16, 1/32, 1/64, 1/128; or 1/5, 1/10, 1/20, 1/25, 1/40, 1/50, 1/100, 1/125 DIP switch current options: 1.46A, 1.91A, 2.37A, 2.84A, 3.31A, 3.76A, 4.20A Auto-Tuning available on SW4 Automatic idle-current reduction is selected on SW4 Low motor heating Support: PULSE/DIRECTION & Enable TTL compatible and optically isolated input 15 selectable resolutions, up to 25,000 steps/rev Short-voltage, over-voltag..
$43.00
Bi-Polar Stepper Motor Driver (Part Number SMD-M542)
Heatsink integrated and connectors included Input: 20-50 VDC .... Output: 1.0 - 4.2A Microstepping options: 1/2, 1/4, 1/8, 1/16, 1/32, 1/64, 1/128; or 1/5, 1/10, 1/20, 1/25, 1/40, 1/50, 1/100, 1/125 DIP switch current options: 1.00A, 1.46A, 1.91A, 2.37A, 2.84A, 3.31A, 3.76A, 4.20A Low motor heating because of the implementation of 3-state current control technology Support: PULSE/DIRECTION & CW/CCW modes Self-adjustment technology Pulse input frequency up to 300 KHz TTL compatible and optically isolated input Automatic idle-curre..
$65.00
Bi-Polar Stepper Motor Driver (Part Number SMD-M542-05)
Heatsink integrated and connectors included Input: 20-50 VDC Output: 1.0 - 4.2A Microstepping options: 1/2, 1/4, 1/8, 1/16, 1/32, 1/64, 1/128; or 1/5, 1/10, 1/20, 1/25, 1/40, 1/50, 1/100, 1/125 DIP switch current options: 1.20A, 1.75A, 2.29A, 2.84A, 3.41A, 3.97A, 4.51A, 5.04A Low motor heating because of the implementation of 3-state current control technology Support: PULSE/DIRECTION & CW/CCW modes Self-adjustment technology Pulse input frequency up to 300 KHz TTL compatible and optically isolated input Automatic idle-curr..
$65.00
Bi-Polar Stepper Motor Driver (Part Number SMD-M860)
Heatsink integrated and connectors included Input power voltage of 24-80 VDC; output current of 2.4 to 7.2A Extra low noise; extra low motor heating; extra smoothness. Anti- resonance at low to middle speed 16 microstepping options via DIP switches: 1/2, 1/4, 1/8, 1/16, 1/32, 1/64, 1/128, 1/256, 1/5, 1/10, 1/20, 1/25, 1/40, 1/50, 1/100, 1/200 8 output current options via DIP switches: 2.4, 3.08, 3.77, 4.45, 5.14, 5.83, 6.52, 7.20A Low motor heating because of the implementation of 3-state current control technology Support PULSE/DIRECTION and CW..
$100.00
Bi-Polar Stepper Motor Driver (Part Number SMD-MB450A)
Heatsink integrated and connectors included Input: 20-50 VDC Output: 1.0 - 4.2A Microstepping options: 1/2, 1/4, 1/8, 1/16, 1/32, 1/64, 1/128; or 1/5, 1/10, 1/20, 1/25, 1/40, 1/50, 1/100, 1/125 DIP switch current options: 1.00A, 1.46A, 1.92A, 2.37A, 2.84A, 3.32A, 3.76A, 4.20A Low motor heating Support: PULSE/DIRECTION & Enable TTL compatible and optically isolated input Automatic idle-current reduction is selected on SW4 15 selectable resolutions, up to 25,000 steps/rev Short-voltage, over-voltage, over-current and over tem..
$55.00