Laser Tubes

Laser Tubes


Standard Laser Tubes

The replacement laser tube should be ordered to match the existing laser machine. In order to properly fit the machine, please check the tube length, diameter, and matching laser power supply.

Laser tube (30W): (Length=900mm, Diameter=51mm)

Laser tube (40W): (Length=1010mm, Diameter=51mm)

Laser tube (60W): (Length=1200mm, Diameter=54mm)

Laser tube (80W): (Length=1225mm, Diameter=80mm) >


* All laser tubes are tested by a technician prior to shipping.
** Please contact us to ensure you get the correct laser tube length, diameter, wattage. We try to work with our factories and customers to ensure you get the best products for your needs.

Laser Tubes

Laser Tube Mounts

The replacement laser tube mount should be ordered to match the laser tube. In order to properly fit the laser tube, please check the tube diameter.

Laser Tube Mount Clamp - 55mm - mfg Rabbit Laser (Clamping Diameter = 55mm)
         Construction: Machined Iron or aluminum
         Fits 50mm diameter laser tube and foam spacer
         Mounting pattern 4-holes at 4mm each, 30x50mm

Laser Tube Mount Clamp - 65mm - mfg Rabbit Laser (Clamping Diameter = 65mm)
         Construction: Machined Iron or Aluminum
         Fits 60mm diameter laser tube and foam spacer
         Mounting pattern 4-holes at 4mm each, 30x50mm

Laser Tube Mount Clamp - 85mm - mfg Rabbit Laser (Clamping Diameter = 85mm)
         Construction: Machined Iron or Aluminum with weldments
         Fits 80mm diameter laser tube and foam spacer
         Mounting pattern 4-holes at 4mm each, 30x50mm

Laser Tube Mount Clamp - 55mm - mfg QX (Clamping Diameter = 55mm)
         Construction: Machined Aluminum
         Fits 50mm diameter laser tube and foam spacer
         Mounting pattern 2-holes at 5mm each, 60mm apart

Laser Tube Mount Clamp - 65mm - mfg QX (Clamping Diameter = 65mm)
         Construction: Machined Aluminum
         Fits 60mm diameter laser tube and foam spacer
         Mounting pattern 2-holes at 5mm each, 60mm apart

Laser Tube Mount Clamp - 85mm - mfg QX (Clamping Diameter = 85mm)
         Construction: Machined Aluminum
         Fits 80mm diameter laser tube and foam spacer
         Mounting pattern 2-holes at 5mm each, 60mm apart

Laser Power Supplies


Laser Power Supplies

The replacement power supply will provide the 20 to 24 thousand volts needed for your laser tube. The typical current output is 25-30 milliamps. The input signal is the typical 0 to 5 VDC analog. The connections are: [H]-[L]-[P]-[GND]-[Analog Level]-[+5VDC]

Laser power supply(30W) 120VAC

Laser power supply(40W) 120VAC

Laser power supply(40/60W) 220VAC

Laser power supply(40/60W) 120VAC

Laser power supply(80W)

Laser power supply(80W)

All power supplies use green connectors for plugging in the power and control lines. The actual size and appearance of power supply varies according to wattage and current factory design.

Make sure to specify the appropriate input voltage.

* All laser power supplies are tested by a technician prior to shipping.
** Please contact us to ensure you get the correct laser power supply to match your laser tube. We try to work with our factories and customers to ensure you get the correct products for your needs.


email:Rabbit Laser USA