CW-6000 Chillers Freon Compressor-Based Chiller CW-6000          Chiller: $1200 (CW-6000) ** Temperature Controller, Closed fluid loop, Freon compressor, Dual 8-Inch radiator fans, Fluid level gauge, flow sensor interlock ***     Description: For pumping and cooling the water that flows through the laser tube. Maintains a water temperature less than the set threshold to keep the laser tube cool. The dimensions are WWWW wide x LLLL long x TTTTT tall (including handles) inches. This model is only available in 230VAC. Please call for available inventory.
	CW-5200 Chillers Freon Compressor-Based Chiller CW-5200          Chiller: $760 (CW-5200) ** Temperature Controller, Closed fluid loop, Freon compressor, Dual 8-Inch radiator fans, Fluid level gauge, flow sensor interlock ***     Description: For pumping and cooling the water that flows through the laser tube. Maintains a water temperature less than the set threshold to keep the laser tube cool. The dimensions are 11.5 wide x 22.5 long x 19 tall (including handles) inches. This model is only available in 230VAC.
	CW-5000 Chillers Freon Compressor-Based Chiller CW-5000          Chiller: $700 (CW-5000) ** Temperature Controller, Closed fluid loop, Freon compressor, Dual 8-Inch radiator fans, Fluid level gauge, flow sensor interlock ***     Description: For pumping and cooling the water that flows through the laser tube. Maintains a water temperature less than the set threshold to keep the laser tube cool. This item is typically included in laser systems with higher than 60 watts. The dimensions are 11.5 wide x 22.5 long x 19 tall (including handles) inches. Available in 230 and 120 VAC versions. Please be careful to select the proper 110VAC or 230VAC voltage when purchasing the chiller.
	CW-3000 Chiller Fan-Radiator-Based Chiller CW-3000          Chiller: $350 (CW-3000) ** Temperature Controller, Closed fluid loop, 8-Inch radiator fan, Fluid level gauge, flow sensor interlock ***     Description: For pumping and cooling the water that flows through the laser tube. Uses the ambient air temperature to cool the water to the set threshold and cools the laser tube. This item is typically suggested for laser systems with 30, 40, or 60 watts. The dimensions are 10.5 wide x 19 long x 15 tall (including handles) inches. Available in 120 VAC version only.
	CW-XX00 Replacement Water Pump, 24VDC Replacement water pump for CW series water chillers. For pumping the cooling fluid that flows through the laser tube. 24VDC Brushless motor Overvoltage protection Elevated stand (inlet port is 2.125 inches from base) Inlet port - 0.75 OD, 0.60 ID Outlet port - 0.40 OD, 0.275 ID Direct replacement water pump for CW-5000 and CW-3000 chillers
	CW-XX00 Replacement Power Supply, 24VDC Replacement 24VDC Power Supply for CW series water chillers. Powers the 24VDC pump.
	CW-XX00 Chiller Temperature Controller, 24VDC Replaces Temperature Controllers for CW series water chillers. .
	CW-XX00 Water Level Sensor Replacement Water Level Sensor for CW series water chillers.
	CW-XX00 Safety Interlock Connectors Replacement Safety Interlock Connectors for CW series water chillers.
	Water Flow Sensor Replacement Water Flow Sensors.
	Cooling System - Water Pump.         The Submersible water pump is used as part of the cooling system in many laser machines. The typical laser wattage is 60 watts or lower and using a glass CO2 laser tube. If the laser machine is expected to undergo extended usage, then a freon-based chiller should strongly be considered. Submersible Water Pump 700 GPH max: (110VAC) $65 Submersible Water Pump 700 GPH max: (220VAC) $65