I just bought a laser machine, what tools do I need?

Question:

Quick Answer:

Masking tape and magnets. A full list of tools can be found on our web site at www.rabbitlaserusa.com

Complete Answer:

Scissors, 220VAC Plug and Receptacle, Electrical Tape, High Voltage Electrical Tape, High Voltage Electrical Tape, Carpet Tape, Acetone, Denatured Alcohol, Isopropyl Alcohol, Mineral Spirits, Paper Towels, Power Outlet Strip / Surge Protector, Small Set of Screw drivers, Rubber Drawer Liners, Dental Pick, Needle Nose Pliers, Wire Cutters / Wire Strippers, Wire Cutter / Diagonal Cutters, Bent Needle Nose Pliers, Utility Knife, Extension Cord, Assorted Pens and Pencils, Q-tips, Silly Putty, Funnel, Antifreeze 50-50 pre-diluted, Windex or other surface cleaner, Microfiber Towels, 3n1 Lubricating Oil, Egg Crate, Aluminum Flashlight, 6 inch Vent Duct, Magnets and Digital Multi-Meter.

FAQ item was submitted:

3/29/2011 By: Raymond L. Scott

Contact:

https://rabbitlaserusa.com/Partners/ContactUs.html
Raymond L. Scott  ... Owner Engineer
ray@RabbitLaserUSA.com
601 North Verity Parkway
Middletown, OH 45042
(513) 217-5707